ANTIMONY AAS STANDARD SOLUTION 1000 mgL Sb IN DILUTED HCl traceable to NIST

Get a Price/Quote

MOQ : 1 Kilograms

ANTIMONY AAS STANDARD SOLUTION 1000 mgL Sb IN DILUTED HCl traceable to NIST Specification

Grade
Analytical grade; traceable to NIST standards.

EINECS No
Antimony (EINECS No. 231-146-5); Hydrochloric Acid (EINECS No. 231-595-7).

Density
1.01 Gram per cubic centimeter(g/cm3)

Shelf Life
Typically 1 year when stored under recommended conditions.

Appearance
Clear colorless to slightly yellow liquid.

Usage
Used for the quantitative analysis of antimony in various matrices; traceable to NIST for quality assurance.

Taste
Not applicable; chemical standard solutions are not intended for ingestion.

Poisonous
Yes toxic if swallowed or inhaled; hazardous substance.

Solubility
Fully miscible with water.

CAS No
Antimony (CAS No. 7440-36-0) in HCl (CAS No. 7647-01-0).

Smell
Slight acidic odor due to diluted HCl.

Molecular Formula
Sb in HCl (Antimony in diluted hydrochloric acid).

Application
Calibration standard for Atomic Absorption Spectroscopy (AAS).

Refractive Rate
Not specified; dependent on concentration and exact composition.

Properties
Clear colorless to slightly yellow acidic solution.

HS Code
3822.00.00.20 (Standards for laboratory use).

Physical Form
Liquid solution.

Ingredients
1000 mg/L of Sb in diluted hydrochloric acid (HCl).

Structural Formula
Not applicable; solution contains antimony ions in diluted HCl.

Storage
Store at room temperature or as specified away from direct sunlight in a tightly closed container.

Ph Level
Approximately 1 (acidic) due to diluted HCl.

Melting Point
Not applicable; solution does not have a defined melting point.

Molecular Weight
Not applicable; standard solutions are defined by concentration not a molecular weight.

Purity
As a standard solution the purity refers to the accuracy of the 1000 mg/L antimony concentration.

Shape
Not applicable; liquid product.

About ANTIMONY AAS STANDARD SOLUTION 1000 mgL Sb IN DILUTED HCl traceable to NIST

The ANTIMONY AAS STANDARD SOLUTION 1000 mg/L Sb in Diluted HCl is a liquid solution with a slight acidic odor due to diluted HCl. It serves as a calibration standard for Atomic Absorption Spectroscopy (AAS) and is essential for the quantitative analysis of antimony in various matrices. This high-quality standard solution is toxic if swallowed or inhaled and is stored best at room temperature away from direct sunlight. With a shelf life of approximately 1 year when stored under recommended conditions, this analytical grade solution is traceable to NIST standards and adheres to purity and accuracy in its 1000 mg/L antimony concentration.