SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION

Get a Price/Quote

SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION Specification

CAS No
7664-93-9

Poisonous
Highly corrosive and hazardous to health both from ingestion and skin contact.

EINECS No
231-639-5

Melting Point
10 C (50 F)

Ingredients
Sulfuric acid (HSO) and distilled or deionized water.

Density
1.84 Gram per cubic centimeter(g/cm3)

Grade
Laboratory grade (0.1 M concentration)

Appearance
Clear colorless liquid

Physical Form
Clear colorless liquid

Molecular Formula
HSO

Taste
Odorless and generally tasteless in diluted form but concentrated solutions can be highly corrosive and damaging to taste buds.

Purity
Diluted to 0.1 M (approximately 0.2N)

Smell
Odorless in diluted form; can have a faint sulfur-like smell in concentrated solutions.

Application
Used in laboratories for chemical titrations sample analysis and as an industrial precursor for various products.

Ph Level
Approximately 1 (depending on concentration)

Shape
Liquid form in a container

Molecular Weight
98.079 g/mol

Refractive Rate
1.418 1.430 (varies with concentration)

HS Code
28070000

Usage
Dilute according to required concentration for titration or other laboratory procedures.

Structural Formula
H-O-S(=O)-O-H

Storage
Store in a tightly sealed plastic or glass container away from heat and incompatible materials.

Shelf Life
Indefinite if stored properly under controlled conditions.

Solubility
Highly soluble in water exothermic reaction upon mixing.

Properties
Highly corrosive; reacts violently with water and organic matter upon mixing.

About SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION

SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION is a laboratory-grade chemical used in chemical titrations, sample analysis, and as an industrial precursor. This clear colorless liquid is odorless in diluted form but can emit a faint sulfur-like smell in concentrated solutions. Highly corrosive and hazardous, it must be stored properly in sealed containers away from heat. With a molecular weight of 98.079 g/mol and a density of 1.84 g/cm3, it is diluted to a 0.1M concentration and is highly soluble in water. This solution, consisting of sulfuric acid and water, has a pH level around 1 and a refractive rate of 1.418-1.430.

FAQs of SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION:

Q: Can SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION be ingested or come in contact with skin?

A: No, this solution is highly corrosive and poisonous, posing health risks if ingested or in contact with skin.

Q: How should SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION be stored?

A: It should be stored in tightly sealed containers made of plastic or glass, away from heat and incompatible materials.

Q: What is the shelf life of SULPHURIC ACID 0.1 mol-L (0.2N) SOLUTION?

A: If stored properly under controlled conditions, it has an indefinite shelf life.

Q: What is the usage of this solution?

A: It is diluted according to the required concentration for titration or other laboratory procedures.

Q: What precautions should be taken when handling this solution?

A: It should be handled with extreme care, using appropriate personal protective equipment, and in a well-ventilated area due to its highly corrosive nature.

Tell us about your requirement